The dining room is a place for eating, and the installation of lamps and lanterns should be gentle and warm. Under the warm light, there is nothing better than this for the whole family to get together and enjoy the food. Therefore, the restaurant lights must be installed cautiously. Nowadays, people usually choose the ceiling lamp of restaurant lamp for home decoration. Let's see how to install it next.
Ceiling lamp installation tips for restaurant lights:

1. Choose a good location

The first thing to do to install the ceiling light is to determine the installation position of the ceiling light. For example, ceiling lights in the living room, dining room, and kitchen are recommended to be installed in the middle, so that the light in each location is more even. In the bedroom, considering the effect of mosquito nets and light on sleep, ceiling lamps should not be installed above the bed as much as possible.

In addition, the ceiling lamp needs to be installed on a wall or ceiling that can withstand the weight of the ceiling lamp, such as a masonry structure, and try not to choose a wooden wall to avoid the risk of falling over a long period of time.

2. Remove the ceiling lamp mask

Remove the ceiling lamp mask. Under normal circumstances, the ceiling lamp mask can be fixed by rotating and snapping. When removing, pay attention to avoid damage to the ceiling lamp. After removing the mask, remove the lamp tube by the way. Take it off to prevent it from breaking during installation.

Three, install the base

Place the base at the predetermined installation position, mark the wall with a pencil, then remove the base, drill at the marked position with an electric drill, and then install the expansion bolts for fixing the base in the hole. Note that the diameter and depth of the hole should be the same as the bolt. The specifications match. Then put the base back to the predetermined position and fix it.

Fourth, connect the wires

After fixing the base, you can connect the power cord to the ceiling lamp socket. It should be noted that the two wires connected to the ceiling lamp power cord should be in good electrical contact, and they must be wrapped with black tape. Keep a certain distance. If possible, try not to put the two wire ends under the same piece of metal to avoid short circuit and danger.

Five, install the mask and strap

After connecting the wires, you can try to power on, if everything is normal, you can turn off the power and install the ceiling lamp mask. The ceiling lamp in the living room also needs to be equipped with a series of pendants, because each ceiling lamp pendant is different, so the specific installation method can refer to the product manual. The charms are usually left, and can be stored after installation, and can be replaced when needed in the future.